Ceiling Systems
Beam Grid
This continuous beam profile ceiling is an ideal solution for integrating ceiling with demountable partition. Available with sound attenuation panels. Can be manufactured in single & double skin. The beam profile can be used to integrate light fittings, AC grills, and other MEP services. Offered as recess, flush, or reveled edge with the panel. Panels are laid on/clipped in the beam profile, which can be produced in multiple sizes in order to avoid cutting the panels. Lifts upwards for access to ceiling void. Offered in a wide range of sizes, colors & finishes.
Aluminum Alloy as per EN AW 3000 or 5000 series.
Zinc Plated Galvanized Steel G90 grade.
PANELS (mm)
Aluminum or Galvanized Steel:
0.5 to 1.0
BEAMS (mm)(
Galvanized Steel:
0.5 to 2.0
TYPE
Continuous
Inverted
PANEL JOINT DETAIL
Square
BEAM WIDTH (mm): 100-300
DIMENSIONS (mm)
600×600/750×750/900×900/1000×1000/ 1200×1200/1500×1500
+ Custom sizes are available upon request
Plain
Perforated
Decorative Patterns
Polyester Coating: ((5µ (Back) + 20µ (Face))
Polyester Powder Coating: (70µ -80µ)
+ High Performance Coatings like PESDF, PVDF and POLYAMIDE are available upon request.
Acoustic Black Fleece is non-flammable and meets the standard DIN 4102 / B1. Classifica-tion A1 according to EN 13501-1.
Rockwool slabs conforming to ASTM C612 and equivalent BS 3958-5 are provided for acoustic insulation.
Tested as per BS EN ISO 354: 2003 for sound absorption, noise reduction and sound attenuation.
Maximum NRC achieved with Acoustic Black fleece – NRC 0.75
Maximum NRC achieved with Acoustic Black Fleece and Rockwool Insulation – NRC 1.00
Tested as per ASTM E1414-11a for Airborne Sound Attenuation as per
ISO 10848-2.
Maximum CAC can achieved up to – 48 dB
Perforated & Sound Attenuation cover
Tested as per JIS Z 2801: 2000, which inhibits the growth of bacteria on the applied surface.
Achieved by the metal ceiling is LR – 0.85-0.96 tested as per ASTM E 1477.
Surface Spread of flame Class 1 tested as per BS 476: Part 7: 1997
“Non-Combustible” Material tested as per BS 476: Part4: 1970
Flame Spread and Smoke Development Index tested as per ASTM E84 (Class 1 or A)
Standard and custom colors and finishes available upon request.
